You’d better attach importance to this LCD Touch Screen Bezel Frame Assembly for iPhone 5S White if you are eager to replace the well-worn screen with a fire-new one. With high-class material it uses and advanced technology it adopts, this touch screen provides you with not only high sensitivity but also practical applicability. You needn’t to worry about its quality for details have been strictly tested before shipping. Moreover, its fine workmanship makes it smooth and glossy enough, which can even be regarded as a bright mirror. Featured with easy installation, this LCD touch screen is convenient to use. Hurry up; just equip your iPhone 5S with this item. Take it right now!

Features

•  High quality screen for iPhone 5S
• Each screen is strictly tested before shipping and working
• Make your cell phone look as new as the original one
• Also cure display problems, dead pixels, cracked screen, and wrong color issues
• Quality controlled and tested, 100% working good
• The screen offers you high sensitivity and durable performance
• Featured with high sensitivity, easy installation and practical applicability
• It is used to repair and replace your wrong, cracked, damaged, faulty, shattered screen  

Specifications

 Install the LCD screen

1、(Hold the block of the LCD flex cable with your left thumb as the pictures shows.)
Don’t bend the position of the flex cable that the screwdriver points to.

2、(The position between the block and LCD back cannot be bent.) Gently press the block with the left thumb and lightly bend the flex cable with the right index finger.

3、Keep pressing the block with your left thumb when you buckle the connector of LCD flex onto the main board. You will hear a sound when they are well connected. If not, please buckle it again.

4、Keep pressing the block with your left thumb then you buckle the connector of touch screen flex onto the main board. You will hear a sound when they are well connected. If not, please buckle it again.

5、When you are testing the screen, please don’t bend the flex cable under the block.
Please check the LCD and touch screen flex cable are well buckled onto the main board. And then keep pressing the connector of the flex cable when you are testing the screen.

6、Please pay attention to the angel and gesture. Keep pressing the connector of the flex cable when you are testing the screen. The angle between the screen and the main board should be over 45 degrees.
If the screen is abnormal, please buckle the flex cables again.

Package Includes

• 1 x LCD Touch Screen Bezel Frame Assembly for iPhone 5S

Extra Info

Please make sure that the product is installed by professional, otherwise, you may damage the touch digitizer,LCD display screen and flex cable when disassembling or installing the product.Due to the complexity of iPhone iPad iPod structures, suggest you to seek the professional for dismantling and installing your phone, otherwise may be easy broken it.We′ll not bear the loss of incorrect installation and purchase ,thanks for your understanding.

Remove the LCD screen
1、Detach the screws on both sides of the slot.

2、Suck the screen with a suction pad. Please put the suction pad away from the home key and remember to suck the screen with moderate strength.

3、Remove the suction pad and slowly open the screen.

4、Unscrew the screws to detach the iron plate that is for fixing the screen flex cables.

5、Remove the flex cables of screen and touch screen.

6、The screen has been detached from the main board completely.