fodmart

fodmart


  • The APM2.8 Flight Controller Set w/ NEO-7M GPS, 3DR 915Mhz Telemetry, OSD, Power Module provides an all-in-one flight controller kit for RC fever fans. The latest version of APM2.8 Flight Controller is compatible with Arduino and designed with shock absorber for stability and durability. Inbuilt chips include 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer. And it has an onboard 4MB dataflash chip for automatic datalogging. This flight controller set also includes NEO-7M GPS, 3DR 915Mhz radio wireless telemetry kit, Crius MAVLink-OSD V2.1, and Crius power module.

    Features
    • APM2.8 Flight Controller
    • Latest version of APM2.8 Flight Controller, compatible with Arduino
    • Designed with shock absorber for stability and durability
    • Inbuilt chips include 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
    • Onboard 4MB dataflash chip for automatic datalogging
    • One of the first open source autopilot systems to use Invensense’s 6 DOF Accelerometer / Gyro MPU-6000
    • Barometric pressure sensor upgraded to MS5611-01BA03
    • Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively NEO-7M GPS & Compass Module
    • Built-in 25 x 25 x 4mm ceramic patch antenna
    • LNA and SAW chip
    • 3.3V LDO low noise regulator
    • UART (TTL) port with EMI protection
    • 3V rechargeable backup capacitors
    • Fix LED indicators
    • Reverse polarity protection for input power
    • NMEA protocol 3DR 915Mhz Radio Wireless Telemetry Kit
    • MAVLink protocol framing and status reporting
    • Frequency hopping spread spectrum (FHSS)
    • Adaptive time division multiplexing (TDM)
    • Support LBT and AFA
    • Configurable duty cycle
    • Built in error correcting code (correct up to 25% data bit errors)
    • Demonstrated range of several kilometers with a small omni antenna
    • Can be used with a bi-directional amplifier for even more range
    • Open source firmware
    • AT commands for radio configuration
    • RT commands for remote radio configuration
    • Adaptive flow control when used with APM
    • Based on HM-TRP radio modules, with Si1000 8051 micro-controller and Si4432 radio module Crius MAVLink-OSD V2.1
    • ATMEGA328P Microcontroller
    • MAX7456-EUI monochrome on-screen display
    • 5V/500mA DC/DC regulator for MAX7456-EUI
    • Support NTSC & PAL, FTDI connector
    • Full MAVLink protocol support
    • Graphical configurator tool Crius Power Module
    • Voltage and current measurement configured for 5V ADC
    • 6P molex cable plugs directly to APM/Arduflyer 2.5’s "PM" connector
    Specifications
    Sensor 3-axis Gyro, Accelerometer, Magnetometer, Barometer
    Onboard Dataflash Chip 4MB
    Barometer MS5611-01BA03
    Processor Atmel ATMEGA2560
    USB Processor Atmel ATMEGA32U-2 NEO-7M GPS & Compass Module
    Built-in Antenna 25 x 25 x 4mm
    Baud Rate 9600
    Nav rate 1Hz
    TIMEPULSE (Fix LED) Rate 1Hz 3DR 915Mhz Radio Wireless Telemetry Kit
    Frequency 915MHz
    Receiver Sensitivity Up to -121dBm
    Transmit Power Up to 20dBm (100mW)
    Air Data Rate Up to 250kbps Crius MAVLink-OSD V2.1
    Microcontroller ATMEGA328P
    On-Screen Display MAX7456-EUI Monochrome
    DC/DC Regulator 5V 500mA
    Operating Voltage 5V (FTDI Connector), 12V (Video I/O Connector)
    Video Standard NTSC & PAL Crius Power Module
    Input Voltage 6-28V (Support 30V)
    Max Current Sensing 90A
    Voltage and Current Measurement 5V ADC
    Switching Regulator Outputs 5.3V±0.1V, 3A Max
    Cable Plugs 6P Molex General
    Dimensions (3.15 x 3.15 x 1.18)" / (8 x 8 x 3)cm (L x W x H)
    Weight 5.29oz / 150g
    Package Includes
    • 1 x APM2.8 FC with Shock Absorber
    • 1 x NEO-7M GPS Module
    • 1 x Crius APM Power Module
    • 1 x Crius MAVLink-OSD V2.1
    • 1 x 3DR 915Mhz Radio Wireless Telemetry Kit
    • 1 x GPS Bracket
    • 1 x 3DR Telemetry OSD Y Style Connection Cable