Newest Wireless 1/3" 380TVL Pinhole Camera Transmitter with Receiver Set suitable for monitoring children and elders, and widely used for theft prevention, after-hours surveillance, home security, For household, companies, shops, factories, security CCTV system kit. The switching receiver allows you to manually select which camera you want to view, or the receiver can cycle through them automatically. This can all be controlled via the remote control! You can view the cameras on your TV or record directly to VCR!

Features

• New and high quality
• 380TV lines picture display
• Low radiation, safe and healthy
• Built-in microphone for audio monitoring
• Including adaptive bracket, easy installation
• Suitable for monitoring children, elders and widely used for theft prevention, after hours surveillance, home security, etc.
• Only for certain types

Specifications

Camera:

Receiver:

Package Includes

• 1 x Wireless 1/3" 380TVL Pinhole Camera Transmitter with Receiver Set
• 1 x Antenna
• 1 x 110V /220V AC Adapter for the camera (camera can either use battery or the power adapter)
• 1 x 8V Battery Adapter clip (for camera uses battery)
• 1 x 110v /220V AC Adapter for the receiver
• 1 x Video Cable (from Transmitter to your TV/VCR)
• 1 x User Manual

Extra Info

Wireless cameras are basically described as a wireless transmitter carrying a camera signal. The Camera is wired to a wireless transmitter and the signal travels between the camera and the receiver. This works much like radio. The sound you hear on a radio is transmitted wirelessly and you tune to a certain frequency and hear the sound. Wireless cameras have a channel also. The receiver has channels to tune in and then you get the picture. The wireless camera picture is sent by the transmitter the receiver collects this signal and outputs it to your Computer OR TV Monitor depending on the receiver type.

The Camera sees the image, the camera then provides the video to the transmitter, then the transmitter sends the wireless signal to the receiver. There are many types of wireless cameras. You can make most any camera wireless by adding a wireless transmitter and receiver. The camera and transmitter require power. The power is provided by battery and/ or transformer / adapter. The complete (Diagram 1) wiring for the wireless camera and transmitter end follows.

As you can see (by Diagram 1), the camera and transmitter both need power. The camera sees an image, and sends it to the transmitter, and the transmitter sends the signal out to the air. The receiver picks up the signal and outputs it to a TV / Computer / Digital Video recorder. This is a basic diagram. Many wireless cameras and transmitters are very small and the power is provided to both from one source. A good example of this is a hidden wireless camera. IE: A clock radio wireless camera is powered by plugging in the clock. The camera and wireless transmitter are provided power by the clock radio internally.

A wireless receiver has only one function. After the camera and wireless transmitters have provided the wireless video signal the receiver collects this signal and routes it the Monitor, TV, VCR, DVR or PC (or alternative recording or viewing device). See diagram 2.
As you can see in Diagram 2 the receiver accepts the wireless transmitters signal and then out puts it to your TV, VCR, Monitor or PC. The receiver needs only power and a Device to view and or record the Signal / Video.

Video Transmitters can be obtained separate from cameras. If you have a wired camera now you can turn it into wireless by adding a transmitter and receiver. Instead of the wire from the camera to the recording device or monitor the wireless signal will send the video. Again you will need to provide power to the camera and the transmitter. Most transmitters and receivers are sold as a package but some are not. Be sure to check with the supplier.

Analysis of Common Questions
1. What will you do when the indicator light does not work?
Check that the power adapter is properly inserted into AC power outlet, and make sure that AC main power switch is turned on, and the receiver connects to the power adapter well.
2. What will you do when it displays unclear image or cannot display the image?
Please check the following steps:

• (1). Keep the receiver switched on.
• (2). Keep suitable distance between the receiver and camera, so that the receiver can receive the signal from the transmitter.
• (3). Ensure there are no electromagnetic shielding obstructions between the receiver and transmitter, such as steel-structure buildings that will cause great interference to transmission signal.
• (4). Ensure the signals from the receiver and transmitter in the relative frequency. Please note that there cannot exist two or more transmitters with the same frequency within the effective receiving distance, otherwise it will interfere with each other and cause poor image.
• (5). Check the receiver antenna is mounted in place.
• (6). The receiver antenna should be far from electromagnetic shielding, such as the large copper and iron objects
• (7). Ensure there are no high-power transmission signals with the same frequency, such as radio, car radio work, because they will interfere the receiver.