SKYARTEC ButterflyS is a remote controlled Vehicles, and adopts multi-motor to provide lift force and control the flight.There are gyroscope (sensing rotational speed) and accelerometer (sensing acceleration or gravity)on the flight control board, these sensors can help the pilots to stabilize some inherent instability systems, such as multi-rotor copter. Pilots can use the remote controler to control the multi-rotor copter. Roll, pitch,throttle and heading can be controled by the joystick on the remote control, so it requires at least a 4-channel remote control and the receiver.

Flight Control Adjust Software:

Firmware Uploader:

Features

• Open compass function, 4CH (center the direction channel), butterflyS at ground level, the flight attitude will come back to the attitude direction when power on the batteries
• No additional welding
• Adopt excellent quality components, stable and superior performance, use 32bit single chip
• Integration of all components, adopt three-axis acceleration sensor and three-axis angular rate sensor
• Its 6-axis gyro is easy to use and debug, apply to multifarious multi-rotor models
• 3-axis gyro sensitivity and main function can be adjusted by the position adjuster
• Support for multi-axis X type
• Output ports have up to six groups, can drive ESC or servo
• Standard PWM signal output, support conventional PWM ESC (suggest using SKYARTEC series high-speed ESC) and all kinds of servo (digital or analog)
• The receiver can be directly connected to the flight control board, without a special decoder, or alter receiver
• The existing version can achieve stable hover and excellent handling (depending on a reasonable mix, commissioning and operational experience), the mode of operation is similar to the RC helicopter, but easier to adapt
• Can complete some incredible stunt flying skills, also can offer stable battery life to meet small scope aerial photo to replace the complicated and expensive RC helicopter
• Support firmware upgrade (need to buy programming), and unceasing improving performance
• Self-stabilizing system, support fixed-point hovering
• Can quickly eliminate the inertia caused by flight, fast and stable
• Have aerial photo PTZ link function CAMP CAMR

Compass calibration：
    Please calibration the compass before the first flight or change a quite far from the original place.

    Please note: precision is plus or minus 10 degree, precision deviation is big, the compass need to adjust. 

Compass calibration：

     1. put the butterflyS on horizontal position, lock the motor.
     2. Keep touching the button on the receiver until the light flash,then release the button.
     3. Rotate the butterflyS 360 degree according to forward/ backward,left/right and horizontal level orientation, and all of the rotates are finish within 30 seconds, until the receiver is not flash, the butterflyS can fly.

Specifications

Package Includes

• 1 x RC Quadcopter
• 1 x Transmitter

Extra Info

You can click the following link and select suitable accessories, if necessary.

http://www.tmart.com/RC-Quadcopters-Accessories/Hot-Style--Butterfly/