Do you happen to need a Touch Screen assembly for your iPhone 5? We are glad to introduce you this LCD Touch Screen Digitizer Bezel Assembly for iPhone 5 Black. It features top quality material and guaranteed great performance for your disable touch screen assembly. With particular design and lots tests we have been run, you can count on this touch screen assembly. It will not let you down. You will get the same performance just as the original one. Believe us, you should not miss out!

Features

• High quality digitizer Screen for iPhone 5
• Each screen is tested before shipping and working
• It is used to repair replace your wrong, cracked, damaged faulty touch screen
• Fair price yet best performance
• Please feel free to contact our service department
• Due to the complexity of iPhone structures, suggest you that seek the professional help

Specifications

Install the LCD screen
1、(Hold the block of the LCD flex cable with your left thumb as the pictures shows.)
Don’t bend the position of the flex cable that the screwdriver points to.

2、(The position between the block and LCD back cannot be bent.) Gently press the block with the left thumb and lightly bend the flex cable with the right index finger.

3、Keep pressing the block with your left thumb when you buckle the connector of LCD flex onto the main board. You will hear a sound when they are well connected. If not, please buckle it again.

4、Keep pressing the block with your left thumb then you buckle the connector of touch screen flex onto the main board. You will hear a sound when they are well connected. If not, please buckle it again.

5、When you are testing the screen, please don’t bend the flex cable under the block.
Please check the LCD and touch screen flex cable are well buckled onto the main board. And then keep pressing the connector of the flex cable when you are testing the screen.

6、Please pay attention to the angel and gesture. Keep pressing the connector of the flex cable when you are testing the screen. The angle between the screen and the main board should be over 45 degrees.
If the screen is abnormal, please buckle the flex cables again.

Package Includes

• 1 x LCD Touch Screen Replacement Digitizer Assembly for iPhone 5 Black

Extra Info

NOTE

Please make sure that the product is installed by professional, otherwise, you may damage the touch digitizer,LCD display screen and flex cable when disassembling or installing the product.Due to the complexity of iPhone iPad iPod structures, suggest you to seek the professional for dismantling and installing your phone, otherwise may be easy broken it.We′ll not bear the loss of incorrect installation and purchase ,thanks for your understanding.

Remove the LCD screen
1、Detach the screws on both sides of the slot.

2、Suck the screen with a suction pad. Please put the suction pad away from the home key and remember to suck the screen with moderate strength.

3、Remove the suction pad and slowly open the screen.

4、Unscrew the screws to detach the iron plate that is for fixing the screen flex cables.

5、Remove the flex cables of screen and touch screen.

6、The screen has been detached from the main board completely.